Sunday, July 30

How to replace a $5 belt.

My alternator belt broke. Big whoop. A trip to Krager has me all set with a new one. Go to loosen the bolt on the alternator... and it snaps off, leaving 75% of the bolt still in the threads on the alternator. Okay, fine. So I take the whole alternator off, and break a few drill bits drilling out the broken bolt and come up with a new through-bolting system that works better than new. And while I was at it, I made a mounting bracket for the big Racor fuel filter I put in but only mounted half-assed. I decide to clean out the filter -- another five minute job. Or not. The thing was wrenched on so tight at the factory that I can't open the drain plug, and can't unscrew the housing without the aid of an oil-filter wrench -- which holed the filter. And since I can't get the housing assembly apart, I end up havinfg to buy a new fuel filter altogether. Finaly tally: Replacing a $5 belt cost me about $125 and two days of work.

However, I ended up spending last night anchored at Treasure Island. This morning I inflated the dinghy and rowed ashore and took a nice walk before heading back under the bay bridge for home. The engine must have known how much trouble I put into it as it purred like a kitten each time I used it.

0 Comments:

Post a Comment

<< Home